Full Specifications
| Layout | 65% |
| Vendor | CannonKeys |
| Mount Style | Gasket Mount |
| PCB | Hotswap (expected), QMK/VIA |
| Connectivity | Wired (USB-C, expected) |
| Hotswap | Expected — not finalized |
| RGB | Unconfirmed |
| Firmware | QMK/VIA (expected) |
| Stock Status | Group Buy |
| Price | Price TBD |
| Last Verified | Jul 29, 2026 |
Editorial Review
The Think6.5 V3 is currently in its Interest Check phase — the pre-group-buy stage where CannonKeys shares renders and a rough concept to gauge whether there's enough community demand to justify moving into a full group buy round. No payment is required or accepted at this stage.
As the third iteration in the Think6.5 line, the V3 concept builds on feedback from the previous two versions, though final specs including exact plate material, mount tuning, and pricing are typically locked in only once the IC transitions into an official GB with a fixed price and close date.
If you're interested in this board, the most useful action right now is registering interest through CannonKeys' official IC channel (typically linked from their GeekHack thread) — a strong IC response is what determines whether this design moves forward into production at all.
Because the Think6.5 V3 is still in Interest Check — no confirmed plate material, mount tuning, or price — it can't be meaningfully compared against KeebTracker's other tracked 65% boards yet; anything claimed about its final feel or value would be guessing rather than reporting.
What is known: it's the third iteration of an existing CannonKeys line, meaning the concept has already been through two prior rounds of community feedback, which is generally a reason for cautious optimism about the design's maturity even before final specs lock in — CannonKeys typically finalizes plate/mount/price once IC response data justifies moving to a full GB.
Bottom line: not a purchase decision yet — the useful action is registering interest through CannonKeys' official IC channel if the layout and brand appeal, since IC response volume is what determines whether this board reaches production at all.
Similar Keyboards
What's Confirmed vs. Still Unconfirmed
The spec table above reflects the current state of the Interest Check, and it's worth reading closely for what's marked "expected" versus what's actually locked. Layout (65%) and mount style (gasket) are stated as firm in CannonKeys' IC materials, since those are structural case decisions that rarely change once a concept is shown publicly. Hotswap support, connectivity, and firmware are listed as "expected" rather than confirmed — standard for this stage, since PCB sourcing and firmware licensing are typically finalized closer to the GB launch, not during the IC.
Price is intentionally unset at this stage. CannonKeys, like most designers, avoids committing to a number until material costs, PCB specs, and expected order volume are known — quoting a price during IC and then having to raise it at GB launch is a common source of community backlash, so most designers wait.
As the third revision in the Think6.5 line, the V3 concept isn't starting from zero — CannonKeys has two prior Think6.5 rounds' worth of community feedback to draw from, which typically shows up as refinements to plate flex, stabilizer mounting, or case tolerances rather than a ground-up redesign. That history is a reasonable signal of design maturity even before final specs are public, though it's not a guarantee the V3 will proceed to GB at all — some ICs are shelved if response volume doesn't justify moving forward.
KeebTracker will update this page's stock status, spec table, and pricing the moment CannonKeys transitions this listing from Interest Check to an official group buy — check back rather than assuming the current "expected" specs are final. Bookmarking this page or joining the official IC channel are both reasonable ways to stay current, since a design at this stage can move to a full GB announcement with relatively little advance notice once CannonKeys decides response volume justifies it.